Lowongan Kerja SMA SMK D3 S1 Terbaru Semua Jurusan PT Saipem Indonesia Juli 2021

Lowongan Kerja SMA SMK D3 S1 Terbaru Semua Jurusan PT Saipem Indonesia Juli 2021

LokerBlog.com (Lowongan Kerja SMA SMK D3 S1 Terbaru Juli 2021) - Walaupun kondisi saat ini sedang kurang baik, jangan sampai menjadi halangan untuk melamar pekerjaan. Bahkan sekarang dapat melamar pekerjaan dengan lebih praktis dan mudah melalui online. Kita sebagai generasi muda Indonesia, dengan apa adanya yang kita miliki, talenta, kemampuan, keahlian masing-masing, sesederhana itulah setiap dari kita dapat menjadi pejuang masa kini. Dalam masa sulit yang penuh perubahan ini, mari saling memberikan inspirasi yang walau sederhana namun dapat membantu untuk memberikan semangat kepada sesama kita, agar selalu tetap optimis dan pantang menyerah. Anda harus menjadi pencari kerja yang unggul di masa sulit  ini. Memang saat ini banyak sekali para pencari kerja yang ingin mendapatkan pekerjaan baru karena banyak perusahaan melakukan PHK dalam skala besar, Untuk itu Anda harus selalu siap untuk menghadapi beberapa tantangan termasuk seleksi rekrutmen perusahaan idamanmu. Persiapkan dirimu secara matang karena tingkat persaingan di dalam dunia kerja semakin hari semakin ketat. Tidak hanya para lulusan freshgraduate, namun masih banyak di luar sana yang memiliki pengalaman kerja yang juga mencari keberuntungan untuk mendapatkan pekerjaan yang Anda impikan. Persaingan di dalam dunia kerja bukanlah sebuah tantangan baru karena ini sudah merupakan hal yang nyata dan perlu Anda pertimbangkan secara matang Sehingga anda menjadi salah satu prioritas perusahaan. Mintalah dukungan dari teman dan keluarga agar Anda tidak merasa sendirian. Jangan ragu untuk meminta bantuan ketika Anda mengalami masalah sehingga semuanya terasa lebih mudah. Selalu bersyukur, Meskipun terkesan sepele, tetapi bersyukur memberikan efek yang besar bahkan ketika Anda sedang mengalami kesusahan. Luangkan waktu untuk memikirkan hal-hal baik yang sudah Anda dapatkan sejauh ini misalnya bagaimana Anda mendapatkan kesempatan wawancara, atau bisa sekolah hingga perguruan tinggi, dan lain sebagainya. Dengan bersyukur, Anda bisa lebih bahagia dan mudah berdamai dengan keadaan. Jangan lupa bersantai, Meskipun sedang sibuk mencari pekerjaan kesana kemari, Anda tetap mempunyai hak untuk bersantai. Luangkan waktu untuk sekedar me-time, berkumpul dengan keluarga atau teman, dan sebagainya. Lakukan hal-hal yang Anda senangi untuk menghilangkan rasa lelah. Anda juga dapat meluangkan waktu untuk berpikir tentang diri sendiri dan memikirkan apa yang sebenarnya Anda inginkan dalam hidup.

Lowongan Kerja PT Saipem Indonesia - PT Saipem Indonesia berdiri pada 1995 dibidang konstruksi dan instalasi minyak bumi dan gas alam yang berkantor pusat di Jakarta, Indonesia. Saipem Indonesia merupakan anak usaha Saipem International B.V., industri kontraktor minyak dan gas berpusat di Amsterdam, Belanda.

Saat ini PT Saipem Indonesia kembali membuka lowongan kerja terbaru pada bulan Juli 2021 untuk mencari calon karyawan yang siap untuk mengisi posisi jabatan yang sedang dibutuhkan. Perusahaan akan mencari kandidat yang terbaik sesuai dengan kualifikasi dan yang cocok untuk posisi yang akan ditempatkan.

Adapun dibawah ini adalah posisi jabatan yang tersedia beserta dengan kualifikasinya saat ini bagi Anda para pencari kerja yang tertarik untuk mengembangkan karir.

Lowongan Kerja Terbaru PT Saipem Indonesia Tahun 2021

Posisi:

1. Lospe Engineer / Technical Safety Senior/Lead Engineer (2 Position)
  • Department/Project : Offshore Engineering (LOSPE)
  • Education  : University Graduate on Technical Major
  • Seniority  : Senior/Lead Engineer
  • Working Experiences : More than 10 years in similar position or similar field
  • Working Status  : Temporary / Contract
  • Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION:
1. Personal skills
– 1.1. Has experiences on development of LOSPE /Technical Safety document and activities both for project bid and project execution with major international Oil&Gas Companies,
– 1.2. Has experiences in engineering management and manage an internal group of engineers,
– 1.3. Has experiences in interfacing with others discipline, project management, vendors and client.

2. Technical & professional skill/knowledge
2.1. Strong knowledge about LOSPE / Technical Safety regulations, codes & standards,
2.2. Expertise in the various LOSPE / Technical Safety activities:
– 2.2.1. Risk assessment and safety studies e.g. QRA, FERA, EERA, ESSA, DOS, NHRA, RAM study, participation on HAZID/HAZOP/SIL/3D model review workshops,
– 2.2.2. Firefighting system including active and passive fire protection philosophy, FW system PID design, FW and foam system hydraulic calculation, specification and data sheet for firefighting equipment and firefighting equipment layout
– 2.2.3. General safety design e.g. HAC, F&G detector system (F&G detector philosophy, F&G layout, F&G detector mapping, F&G cause and effect matrix, SIL verification), safety equipment, specification/data sheet and layout, gas dispersion and heat radiation study,
– 2.2.4. Environmental engineering e.g. environmental regulation, noise & vibration study, release register

BRIEF JOB DESCRIPTIONS:
  • Lead/coordinate LOSPE / Technical Safety internal group of the following LOSPE / Technical Safety activities; risk assessment & safety studies, firefighting system, general safety, and environmental engineering,
  • Review and/or prepare all document related to point no. #1 including philosophy, calculation, specification and drawing before issue to client, and review document from other disciplines,
  • Back to back with LOSPE / Technical Safety lead engineer in the meetings and technical reviews,
  • Support procurement, commissioning, construction departments and yard activities,
  • Can be mobilized on the project locations including offshore, other Saipem offices both in Indonesia and/or abroad

2. Lospe Drafter / Technical Safety Senior Designer / Drafter (2 Position)
  • Department/Project : Offshore Engineering (LOSPE)
  • Education  : Min. High school / diploma
  • Seniority  : Senior Designer / Drafter
  • Working Experiences : More than 5 years in similar position or similar field
  • Working Status  : Temporary / Contract
  • Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION:
1. Personal skills
• Has experiences on drafting all LOSPE / Technical Safety drawing; FW system PIDs; HAC layout; Safety, firefighting equipment, and escape route layout; PFP layout; F&G detector layout
2. Technical & professional skill/knowledge
• Strong knowledge and operate following software CAD, SPPID, SP3D, PDMS.

BRIEF JOB DESCRIPTIONS:
  • Draw all LOSPE / Technical Safety drawing,
  • Support engineer to develop drawing for report, and 3D model layout review for LOSPE equipment,
  • Can be mobilized on the project locations including offshore, other Saipem offices both in Indonesia and/or abroad

3. Mechanical (Rotating) Engineers
  • Department/Project : Offshore Engineering (Mechanical)
  • Education  : University Graduate on Technical Major
  • Seniority  : Expert Engineer
  • Working Experiences : More than 7 years in similar position or similar field
  • Working Status  : Temporary / Contract (3 months-possibility to extend)
  • Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION:
  • Machinery Engineer – Rotating Equipment with Petrochemical, refinery or Oil & Gas experience.
  • Should have a minimum of 10 years extensive experience in engineering phase (EPCI projects) working on gas turbines and compressors. Graduates from reputable universities.
  • The application of a good level of theoretical knowledge in designs & selection studies, covering the major machinery types e.g. Compressors and Gas turbines and familiar with PGT-25 series gas turbine type is a plus point.
  • Detailed knowledge of international codes and API standards related to the duties is a requirement such as API 616, API 617, API 610, API 670, API 674, API 686 etc.
  • Familiar with Australian Standard.
  • All around experience in work scoping, vendor management, FAT, Field Engineering, and preferably commissioning & troubleshooting experience.
  • Good communication skill, approachable, and able to work with others. Experience in interfacing with field operations and maintenance team is a plus point
  • Preferably has previously interfaced with local and foreign rotating equipment packager and work on brownfield area.
  • Demonstrated ability and sensitivity to work with people from variety of cultural backgrounds.
  • Computer literacy involving the regular use of professional office applications and some technical applications.

BRIEF JOB DESCRIPTIONS:
Develop Engineering works and activities especially for Rotating equipment, ensuring the compliance with Specification, QA/QC and HSE requirement.

The task including;
  • Support Lead to reviews Contractual technical documentation and requirements.
  • Support Lead to defines engineering requirements and interface with other disciplines and optimizes systems ensuring minimal cost and simplification in compliance with the required performance.
  • Prepares the technical documentation for equipment package requisitions (specification, data sheets etc., where requested).
  • Technical negotiation with vendors and controls of vendor documents.
  • Prepares technical evaluation and technical tabulation for vendor technical alignment.
  • Follow-up of assigned equipment/package after order award.
  • Checks and signs all vendor, drawings in coordination with other disciplines
  • Attends  to  internal  review  activities  and  participates  to  inter-discipline  check  meetings  (where required)
  • Provide support for expediting and testing activities.
  • Provide support for document management and prepare final documentation book.
  • Prepare material take-off to support construction activity.
  • Assist construction activity providing information and clarification through vendor(s).

4. Piping Flexibility Engineers (3-persons)
  • Department/Project : Offshore Engineering (Piping)
  • Education  : University Graduate on Technical Major
  • Seniority  : Expert & Senior Engineer
  • Working Experiences : More than 7 years in similar position or similar field
  • Working Status  : Temporary / Contract (6 months-possibility to extend)
  • Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION:
  • Diploma in appropriate engineering subject (Mechanical)
  • [SK1004003] – Knowledge of Discipline engineering design criteria, methods and workflows from conceptual phase up to site engineering phase. Capability to define the technical documents set based on Project quantities and scope of work. Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally orby Vendors,
  • [SK1004006] – Knowledge of workflows and methods to define project quantities,
  • [SK1004007] – Knowledge of main international Discipline standards, codes and reg ulat ions. Capability to analyze dedicated Project requirements in terms of local standards and codes and to identify proper implementation actions. When required by the role, ability to manage the resolution of Engineering Non-Conf ormity (NCR) at site supporting Construction and / or Fabrication activities effectively interfacing project Team, Client and Vendor.
  • [SK1014001] – Knowledge of basic principles of stress analysis design criteria regarding typical load conditions, stress calculations, comparison criteria with admissible values, minimum pipeline elastic bends calculation, anchor blocks design criteria. Capability to perform calculation relevant to expansion/stress analysis in order to allow flexibility and piping support location
  • [SK1004010] – Knowledge of process engineering design. Understanding process documents as applicable including process descriptions, process data sheets, PFD, P and ID.
  • [SK0604022] – Knowledge of piping materials (pipes, fitting, flanges, steel p rofiles, etc.) and consumables (welding roads, gas, etc.) Knowledge of the different materials to be welded for piping and structural steel, such as carbon steel, stainless steel, duplex, Inc onel, galvanized, etc. Knowledge of welding and NDT techniques, procedures (e.g., WPS, PQR) and equipment.
  • [SK2701017] – Capability to prepare the documentation necessary for the Tend er (Purchase Requisition, Technical Specification, Price List). Capability to perform Technical Bid Evaluati on. Capability to find the best technical and economic strategy for the execution of transports.
  • Support the organization’s mission with own behavior and act to promote the organization’ s goals and reputation.
  • Communicate in a simple, clear, and assertive way. Adapt own approach to different audiences to have a positive impact and to gain support for own plans.
  • Be consistent with what he/she says, and with personal and organizat ional values. Act with integrity even though this implies making difficult decisions.
  • Collaborate with peers or teams of diff erent f unctions and countries to achieve success collectively. Share usef ul inf ormation and build trust by listening to all stakeholders. Be interested in other individuals’ perspectives and concerns.
  • Search for opportunities to increase and improve own know-how and competencies. Encourage others to increase their know-how. Curiosity and an orientation for learning are implied.

BRIEF JOB DESCRIPTIONS:
  • Review the Client technical documentation and requirements
  • Issue project piping flexibility (Stress analysis) specification and critical lines list
  • Perf orm calculations of critical piping networks
  • Prepare / issue loading data and diagram
  • Issue technical part of requisitions for all piping supports component s req uired b y f lexibility analysis
  • Issue Technical Bid Evaluation for all piping supports components offers
  • Issue technical part of requisitions for all piping supports components purchase orders
  • Review and approve vendors document related piping supports
  • Perf orm the inter-disciplines checking for the part of documents in accordance with the scope of piping flexibility section
  • Check documents issued by piping flexibility engineers
  • Check the isometrics for construction of critical lines
  • Assist P and ID section preparation for flexibility inputs of line list
  • Inf orm on a permanent basis the Project Piping and Layout leader of any foreseen technical or cost impact or delay risk
  • Capitalize piping flexibility activities performed during the project

5. Piping Layout Engineer (4 Position)
  • Department/Project : Offshore Engineering (Piping)
  • Education  : University Graduate on Technical Major
  • Seniority  : Expert & Senior Engineer
  • Working Experiences : More than 7 years in similar position or similar field
  • Working Status  : Temporary / Contract (6 months-possibility to extend)
  • Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION:
  • Diploma (with extensive similar experiences) or University graduate degree in appropriate engineering subject (mechanical / naval / material / metallurgy / chemical or related).
  • 3D model design software literate S3D is preferable.
  • Knowledge of Piping and Layout engineering design criteria, methods, and workflows from conceptual phase up to site engineering phase.
  • Extensive knowledge of International standards, codes, and regulations (ASME B31.3 / ASME B31.4 / ASME B31.8).
  • Knowledge of basic principles of stress analysis and pipe flexibility requirement.
  • Full knowledge of Piping – Process engineering workflow and of P&ID mechanization procedures and criteria.
  • Full knowledge of P&IDs mechanization battery limits.
  • Knowledge of Piping/Electrical/Instrumental/structural basic terminology and rules.
  • Communicate in a simple, clear and assertive way.
  • Collaborate with peers or teams of different functions and countries to achieve success collectively. Share usef ul inf ormation and build trust by listening to all stakeholders. Be interested in other individuals’ perspectives and concerns.
  • Search for opportunities to increase and improve own know-how and competencies. Encourage o thers to increase their know-how. Curiosity and an orientation for learning are implied

BRIEF JOB DESCRIPTIONS
  • Design, execute or check the typical Piping and Layout studies including:
• 3D Modelling using SmartPlant®3D / S3D
• 3D Model review with other disciplines and manage of clash check
• Construction or design drawings using 2D software or extracted from 3D for p iping networks (overall plot plan, equipment layout drawings, piping general arrangement, piping isometrics and piping supports)
• Bill of materials or material take off
  • Analyze technical documents (e.g., specifications, calculation notes, drawings) to assess the scope of the studies required and the potential risks
  • Check the input data and all the documents and information issued by project
  • Co-ordinate the work of his team with the Piping and Layout engineers of the project
  • Documents updating after comments issued by other disciplines (inter-discipline checks) or external stakeholders
  • Check permanently that all the assumptions upon which his teamwork is based keep up with the project development and warn the project Piping and Layout Lead of any detected anomaly

6. Piping Material Engineer (2 Positions)
  • Department/Project : Offshore Engineering (Piping)
  • Education  : University Graduate on Technical Major
  • Seniority  : Expert & Senior Engineer
  • Working Experiences : More than 7 years in similar position or similar field
  • Working Status  : Temporary / Contract (6 months-possibility to extend)
  • Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION:
  • Diploma (with extensive similar experiences) or University graduate degree in appropriate engineering subject (mechanical / naval / material / metallurgy / chemical or related).
  • Diploma in appropriate engineering subject (Mechanical, Material, Metallurgical)
  • Knowledge of Discipline engineering design criteria, methods and workflows from conceptual phase up to site engineering phase. Capability to define the technical documents set based on Project quantities and scope of work. Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors,
  • Knowledge of workflows and methods to define project quantities,
  • Knowledge of main international Discipline standards, codes and regulat ions. Capability to analyze dedicated Project requirements in terms of local standards and codes and to identify proper implementation actions. When required by the role, ability to manage the resolution of Engineering Non Conf ormity (NCR) at site supporting Construction and / or Fabrication activities effectively interfacing project Team, Client and Vendor.
  • Knowledge of industrial manufacturing processes for Oil and Gas components and management of workf lows
  • Knowledge of process engineering design. Understanding process documents as applicable including process descriptions, process data sheets, PFD, P and ID.
  • Capability to design and coordinate P&IDs for related systems. Full knowledge of Discipline wo rkflow and of Discipline mechanization procedures and criteria. Full knowledge of Discipline P&IDs mechanization battery limits,
  • Knowledge of Piping/Electrical/Instrumental/structural basic terminology and rules,
  • Knowledge of piping materials (pipes, fitting, flanges, steel profiles, etc.) and consumables (weld ing roads, gas, etc.) Knowledge of the different materials to be welded for piping and structural steel, such as carbon steel, stainless steel, duplex, Inconel, galvanized, etc. Knowledge of welding and NDT techniques, procedures (e.g., WPS, PQR) and equipment.

BRIEF JOB DESCRIPTIONS:
  • Capability to prepare the documentation necessary for the Tender (Purchase Requisition, Technical Specification, Price List). Capability to perform Technical Bid Evaluation. Cap ability to f ind the b est technical and economic strategy for the execution of transports.
  • Knowledge of the principles of metallurgy and materials science. Knowledge of the main metallic (and non-metallic) materials used in the upstream and downstream Oil and Gas sectors, their chemical, physical and mechanical properties, their applicability, limitations and costs and other relevant features e.g., market availability, shop and field fabrication, joining methods, etc. Knowledge of manufacturing processes of products used in the upstream and downstream Oil and Gas sectors in different materials , such as: steel making, hot and cold forming (e.g., rolling, forging, drawing, extrusion, casting, etc.), heat treatment, welding and f inishing operations and their inf luence on f inal mechanical and corrosion resistance properties. Ability to draft Product Specifications for components used in the upstream  and downstream Oil and Gas sectors, such as line pipes, hot induction bends, flanges and fittings, forgings , etc. and knowledge of impacts  of products properties on SAIPEM processes and technologies. Knowledge of materials suppliers in the upstream and downstream Oil and Gas sectors, their capabilities, and limitations. Ability to review suppliers’  offers, perf orm technical alignments and evaluations, and participate to technical meetings. Knowledge of materials  destructive and non- destructive test methods used during products manuf acturing, their applicability, and limitations. Knowledge of the main applicable Industry materials International standards and codes (such as ASME, API, ASTM, ISO, DNVGL, etc.) and ability to analyze Clients Specifications and standards.
  • Support the organization’s mission with own behavior and act to promote the organization’ s g oals and reputation.
  • Communicate in a simple, clear, and assertive way. Adapt own approach to different audiences to have a positive impact and to gain support for own plans.
  • Be consistent with what he/she says, and with personal and organizational values. Act with integrity even though this implies making difficult decisions.
  • Collaborate with peers or teams of different functions and countries to achiev e success collectively. Share usef ul inf ormation and build trust by listening to all stakeholders. Be interested in other individuals’ perspectives and concerns.
  • Search for opportunities to increase and improve own know-how and competencies. Encourage o thers to increase their know-how. Curiosity and an orientation for learning are implied.
  • Available and ready to be relocate to other Saipem Center all over the world (e.g., Middle east)

7. Piping S3D Designers (3 persons)
  • Department/Project : Offshore Engineering (Piping)
  • Education  : University Graduate on Technical Major
  • Seniority  : Expert & Senior Level
  • Working Experiences : More than 7 years in similar position or similar field
  • Working Status  : Temporary / Contract (6 months-possibility to extend)
  • Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION
  • Diploma or equivalent technical vocational degree in appropriate engineering subject
  • [SK1004003] – Knowledge of Discipline engineering design criteria, methods and workflows f rom conceptual phase up to site engineering phase. Capability to define the technical documents set b ased on Project quantities and scope of work. Capability to perform and coord inate Pro ject engineering documents production activities and to check and review design documents, prepared either internally or by Vendors,
  • [SK1006001] – Knowledge of tools related to 2D and 3D modelling activities specifically S3D experienced users,
  • [SK1006003] – User level knowledge of Corporate and Operating Center Discipline technical design software tools. User level knowledge of Corporate and Operating Center IT tools supporting business processes such as electronic document system management, and office automation applications,
  • [SK1006006] – Capability to design and coordinate P&IDs for related systems. Full knowledge of Discipline workflow and of Discipline mechanization procedures and criteria. Full knowledge of Discipline P&IDs mechanization battery limits,
  • [SK1014001] – Knowledge of basic principles of stress analysis design criteria regarding typical load conditions, stress calculations, comparison criteria with admissible values, Capability to perform calculation relevant to expansion/stress analysis in order to allow flexibility and piping support location,
  • [SK1014002] – Basic knowledge and capability to develop plant layout and equipment layout acc ording to process requirements defined on PFD or P&ID and in accordance to the engineering good practices : developing the single line structure to lay the piping distribution and the equipment elevation. Knowledge of plant layout optimization,
  • [SK1014003] – Knowledge of Piping/Electrical/Instrumental/structural basic terminology and rules,
  • [SK2006001] – Specific knowledge of drafting drawing techniques,
  • Support the organization’s mission with own behavior and act to promote the organization’s g oals and reputation.
  • Communicate in a simple, clear and assertive way. Adapt own approach to different audiences to have a positive impact and to gain support for own plans.
  • Be consistent with what he/she says, and with personal and organizational values. Act with integrity even though this implies making difficult decisions.
  • Collaborate with peers or teams of different functions and countries to achiev e success collectively. Share usef ul inf ormation and build trust by listening to all stakeholders. Be interested in other individuals’ perspectives and concerns.
  • Search for opportunities to increase and improve own know-how and competencies. Encourage o thers to increase their know-how. Curiosity and an orientation for learning are implied.

BRIEF JOB DESCRIPTIONS:
  • Design, execute or check the typical Piping and Layout studies including :
a. 3D Modelling using SmartPlant®3D / S3D
b. 3D Model review with other disciplines and issue of clash check report
c. Construction or design drawings using 2D software or extracted from 3D for p iping networks (overall plot plan, equipment layout drawings, piping general arrangement, piping isometrics and piping supports)
d. Bill of materials or materials take off
e. Extraction of bill of materials and other information from the 3D CAD model
  • Co-ordinate the work of his team with the Piping and Layout engineers of the project
  • Check the input data and all the documents and information issued by his team
  • Check permanently that all the assumptions upon which his teamwork is based keep up with the project development and warn the project Piping and Layout Lead of any detected anomaly
  • Documents updating after comments issued by other disciplines (inter-discipline checks) or external stakeholders (Client, Yards, Third party review, etc.)
  • Feed the Piping and Layout Department improvement system by reverting the lessons learned d uring the project
  • Support design
  • Engineering support during construction phase

Bagi Anda yang berminat, silahkan melakukan pendaftaran ke alamat email berikut:
recruitment@saipem.com

GABUNG DI CHANNEL TELEGRAM AGAR TIDAK KETINGGALAN INFO LOWONGAN TERBARU SETIAP HARINYA KLIK: 

Informasi:

Diharapkan untuk membaca secara keseluruhan informasi dengan teliti
Hanya pelamar terbaik sesuai klasifikasi yang akan diproses untuk mengikuti seleksi selanjutnya
Selama proses rekrutmen tidak ada dikenakan biaya apapun

Semoga informasi ini bermanfaat bagi Anda para pencari kerja dan jangan lupa untuk membagikannya kepada teman atau kerabat yang membutuhkan.
Informasi seputar lowongan kerja BUMN, CPNS & Swasta lainnya kunjungi www.lokerblog.com

Posting Komentar

0 Komentar